(1)?D. Liang, J. Li* and R. Qu, "Super-twisting algorithm based sliding-mode observer with online parameter estimation for sensorless control of permanent magnet synchronous machine," 2016 IEEE Energy Conversion Congress and Exposition (ECCE), Milwaukee, WI, USA, 2016, pp. 1-8.
(2)?A. Sun, J. Li*, R. Qu, J. Chen and H. Lu, "Rotor design considerations for a variable-flux flux-intensifying interior permanent magnet machine with improved torque quality and reduced magnetization current," 2015 IEEE Energy Conversion Congress and Exposition (ECCE), Montreal, QC, 2015, pp. 784-790.
(3) H. Lu, J. Li*, R. Qu and S. Jia, "Loss minimization control of vernier reluctance machines with DC field windings in stator,"?IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society, Yokohama, 2015, pp. 001885-001890.
(4)?H. Lu, J. Li*, R. Qu, L. Xiao and D. Ye, "Reduction of unbalanced axial magnetic force in post-fault operation of a novel six-phase double-stator axial flux PM machine using model predictrive control," 2016 IEEE Energy Conversion Congress and Exposition (ECCE), Milwaukee, WI, USA, 2016, pp. 1-8.
(5)? D. Liang, J. Li*, R. Qu, P. Zheng and B. Song, "Evaluation of high-speed permanent magnet synchronous machine drive with three-level and two-level inverter," 2015 IEEE International Electric Machines & Drives Conference (IEMDC), Coeur d'Alene, ID, 2015, pp. 1586-1592.
(6)? H. Fang; R. Qu; J. Li*, "Rotor Design for High Speed High-Power Permanent-Magnet Synchronous Machines, " IEEE Transactions on Industry Applications, accepted.
(7)? Y. Lu; J. Li*; H. Lu; R. Qu; L. Xiao; D. Li; R. Zhang, "Six-Phase Double-Stator Inner-Rotor Axial Flux PM Machine with Novel Detached Winding," in IEEE Transactions on Industry Applications , in press.
(8)??L. Xiao, J. Li*, R. Qu, Y. Lu, R. Zhang, and D. Li, “Cogging Torque Analysis and Minimization of Axial Flux PM Machines with Combined Rectangle-shape Magnet,” IEEE Transactions on Industry Applications , in press
(9)?S. Jia; R. Qu; J. Li*; D. Li; H. Lu, "Design Considerations of Stator DC-Winding Excited Vernier Reluctance Machines Based on the Magnetic Gear Effect," in IEEE Transactions on Industry Applications , in press
(10)?R. Zhang, J. Li*, R. Qu and D. Li, "A Novel Triple-Rotor Axial-Flux Vernier Permanent Magnet Machine," IEEE Transactions on Applied Superconductivity, vol. 26, no. 7, pp. 1-5, Oct. 2016.
(11)?S. Jia, R. Qu, J. Li*, X. Fan and M. Zhang, "Study of Direct-Drive Permanent-Magnet Synchronous Generators With Solid Rotor Back Iron and Different Windings," in IEEE Transactions on Industry Applications, vol. 52, no. 2, pp. 1369-1379, March-April 2016.
(12)?Y. Gao, R. Qu, D. Li, J. Li* and G. Zhou, "Consequent-Pole Flux-Reversal Permanent-Magnet Machine for Electric Vehicle Propulsion," in IEEE Transactions on Applied Superconductivity, vol. 26, no. 4, pp. 1-5, June 2016.
(13)?A. Sun, J. Li*, R. Qu and D. Li, "Effect of Multilayer Windings on Rotor Losses of Interior Permanent Magnet Generator With Fractional-Slot Concentrated-Windings," in IEEE Transactions on Magnetics, vol. 50, no. 11, pp. 1-4, Nov. 2014.
(14)?Jian Li, Ronghai Qu, Zhichu Chen and Yun-Hyun Cho*, “Optimization of energy conversion loop in switched reluctance motor for efficiency improvement”, Journal of Electrical Engineering & Technology, v8, n3, p565-571, Oct.2013.
(15)?Jian Li, Da-Woon Choi, Dong-Hyeok Son and Yun-Hyun Cho*, “Effects of MMF Harmonics on Rotor Eddy-Current Losses for Inner-Rotor Fractional Slot Axial Flux Permanent Magnet Synchronous Machines”, IEEE Transactions on Magnetics, Vol. 48, No. 12, pp.839-842, Feb. 2012.
(16)?Jian Li, Da-woon Choi, Chang-Hum Cho, Dae-Hyun Koo, and Yun-Hyun Cho*, “Eddy-Current Calculation of Solid Components in Fractional Slot Axial Flux Permanent Magnet Synchronous Machines”, IEEE Transactions on Magnetics, Vol. 47, No. 10, pp.4254-4257, October. 2011.
(17)?Jian Li and Yunhyun Cho*, “Dynamic Reduction of Unbalanced Magnetic Force and Vibration in Switched Reluctance Motor by the Parallel Paths in Windings”, Mathmatics and Computers in Simulation Vol. 81, No. 2, pp.407-419, Oct. 2010.
(18)?Jian Li, and Yunhyun Cho*, “Investigation into Reduction of Vibration and Acoustic Noise in Switched Reluctance Motors in Radial Force Excitation and Frame Transfer Function Aspects”, IEEE Transactions on Magnetics, Vol. 45, No. 10, pp.4664-4667, October. 2009.
(19)?Jian Li, Dawoon Choi and Yunhyun Cho*, “Analysis of rotor eccentricity in switched reluctance motor with parallel winding using FEM”, IEEE Transactions on Magnetics, Vol. 45, No. 6, pp.2851-2854, June. 2009.
(20)?Jian Li, Xueguan Song and Yunhyun Cho*, “Comparison of 12/8 and 6/4 Switched Reluctance Motor: Noise and Vibration Aspects”, IEEE Transactions on Magnetics, Vol. 44, No. 11, pp.4131-4134, Nov. 2008.
?
